Section 105 (Instrumentation System & Driver Information Center): Clock: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the audio, (model with audio) < Ref. to REMOVAL , Audio. >
Remove the navigation unit, (model with navigation) < Ref. to PROCEDURE , Navigation Body. >
Insert hands from the audio space, disengage the tabs of the bracket on the back side of the instrument panel, and push the clock.

Fig 1: Disengaging Tabs Of Bracket On Back Side Of Instrument Panel
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the harness connector and remove the clock.