Overview - Engine Oil Cooler
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Engine Oil Cooler, Coolant Shut-Off Valve
- Seals
- For the mounting plate
- Mounting Plate
- For the engine oil cooler
- Bolt
- 9 Nm
- Seal
- For the engine oil cooler
- Always replace
- Bolt
- 9 Nm
- Engine Oil Cooler
- See NOTE: Refer to OVERVIEW - OIL PAN/OIL PUMP .
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
- Coolant Shut-Off Valve
- Removing and installing. Refer to COOLANT SHUT-OFF VALVE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification -Item 3- OVERVIEW - COOLANT VALVE => List Item:Bolt .
- Seal
- Always replace
- For the shut-off valve
Engine Oil Cooler Thermostat
- Cover
- For the temperature regulator for the engine oil cooler
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .
- Bolt
- Tightening specification and sequence. Refer to Fig 3.
- Always replace
- O-ring
- Always replace
- Engine Oil Cooler Thermostat
- Removing and installing. Refer to ENGINE OIL COOLER THERMOSTAT, REMOVING AND INSTALLING .
- Sealing Flange
- Belt pulley side
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .