LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1031 (Engine Lubrication System (Service Information - CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB)) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler Thermostat, Removing And Installing >> Installing

Engine Oil Cooler Thermostat, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the O-ring -3-.

-- Install the coolant pump ribbed belt pulley. Refer to OVERVIEW - COOLANT PUMP .

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals