Gap Cover, Replacing, Sedan
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Window
- Removed
- Gap Cover
-- Remove all around the gap cover.
-- Remove any remaining adhesive with a glass scraper.
-- Clean the adhesive surface using Cleaning Solution :D 009 401 04 .
-- Apply Glass/Paint Primer :D 009 200 02 to the adhesive surface and let it dry for 10 minutes.
-- Press the gap cover at the corners starting at the top.
-- Peel off the backing from the gap cover little by little and then press the cover onto the sides of the window -a- top, or -b-.
-- Press the gap cover using Roller :3356 .