Camshaft Adjuster Valves, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
Cylinder Bank 1 (Right)
-- Free up the Evaporative Emission (EVAP) system hose -1- from the air guide pipe.
-- Remove the vacuum hose -2- from the air guide pipe connection.
-- Loosen the clamps -arrows- and remove the air guide pipe.
Continued for Both Sides
-- Disconnect the connector -1-.
-- Remove the bolt -2- in question and then remove the valve: