LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1028 (Cylinder Head, VALVETRAIN- CREC, Cred, CREH) >> Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Left Timing Chain Cover, Removing And Installing >> Removing

Left Timing Chain Cover, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

During installation, all cable ties must be installed at the same location.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the left Secondary Air Injection (AIR) combination valve from the cylinder head (refer to LEFT COMBINATION VALVE, REMOVING AND INSTALLING ) move to the side.

-- Remove the left coolant pipe. Refer to LEFT COOLANT PIPE, REMOVING AND INSTALLING .

-- Disconnect the connectors -1- for the Camshaft Adjustment Valve 2 -N208- and Exhaust Camshaft Adjustment Valve 2 -N319-.

GWWA15-11358Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore item -2-.

-- Release the catches in direction of -arrow-, remove the wiring duct -1- toward the rear and push to the side.

GWWA10-11841Courtesy of AUDI OF AMERICA, LLC

-- Remove the electrical connectors -3, 4 and 5- from the bracket and move to the side.

GWWA15-11609Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore items -1 and 2-.

-- Remove the bolts -arrows- and the bracket -1- for the connectors.

GWWA15-11611Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 8- and the bracket -arrows A and B-.

GWWA15-11579Courtesy of AUDI OF AMERICA, LLC

-- Carefully loosen the left timing chain cover for example with a scraper from the adhesive and remove.

scientia non olet · About LEMON Manuals