Cylinder Bank 2 (Left)
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not possible to remove the crankcase ventilation hose -arrow- from the cylinder head cover without damaging it.
-- Remove the bolts in the following sequence: -12 to 1-.
-- Move the cylinder head cover with the crankcase ventilation hose connected -arrow- to the side.
If the Cylinder Head Cover is to be Removed
-- Remove the Throttle Valve Control Module -J338-. Refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .
-- Remove the bolt -1-, remove the connection with the crankcase ventilation hose and free it up.
-- Remove the cylinder head cover.
NOTE:
Ignore item -2-.