Camshaft Timing Chain, Removing From Camshafts: Installing: Notes

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Replace the bolts that were tightened with an additional turn.

CAUTION:

Risk of damaging valves and piston crowns.

If camshafts are rotated, crankshaft may not rest with any piston at "TDC".

The timing mechanism drive chain is installed. Refer to TIMING MECHANISM DRIVE CHAIN, REMOVING AND INSTALLING .
Crankshaft -1- secured in "TDC" using :T40069 .

Courtesy of AUDI OF AMERICA, LLC

:T40133/1 tightened on cylinder bank 1 (right) to 25 Nm -arrows-.

Courtesy of AUDI OF AMERICA, LLC
:T40133/2 tightened on cylinder bank 2 (left) to 25 Nm -arrows-.

Courtesy of AUDI OF AMERICA, LLC