Oil Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the oil baffle.
-- Remove the bolts -arrows-.
-- Push the driveshaft -1- with pliers -2- against the spring force and remove the oil pump -3-.
NOTE:
The oil pump input shaft remains installed.