LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1026 (Engine Lubrication System (Service Information - CREC, Cred, CREH)) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING >> Installing

Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the gasket -4- after removal.

-- Fill the engine oil and check the oil level. Refer to => 411.

scientia non olet · About LEMON Manuals