Installed Calibration Tool Overview
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- :VAS6350/1
- :VAS6350/1
- Right Angle Bracket
- :VAS6350/2 mount
- Plastic Foot
- Three on underside of the calibration board
- Adjustable for aligning horizontal position of the calibration board
- :VAS6350/3
- On the calibration board
- Switching on and off. Refer to the Owner's Manual.
- :VAS6350/2
- On the calibration board
- Refer to the Owner's Manual for notes on the operation.
- Level
- On the calibration board
- For checking the horizontal position
- Left Angle Bracket
- :VAS6350/2 mount
- Calibration Board
- Between the mounts on the calibration board and the :VAS6350/1 -dimension A- 1.47 m through 1.90 m