Oil Pan Upper Section Bolts Tightening Sequence And Specifications

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Pan Upper Section Bolts Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten The Bolts In Stages As Follows:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 6-	Install by hand all the way
2.	-1 to 6-	5 Nm diagonally
3.	-1 to 6-	In a diagonal sequence, turn an additional 90°