Oil Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission Removed. Refer to TRANSMISSION, DISASSEMBLING AND ASSEMBLING [7-SPEED DUAL CLUTCH TRANSMISSION 0CJ, 0CL, 0CK, 0DN, 0DP] and/or TRANSMISSION, REMOVING [7-SPEED DUAL CLUTCH TRANSMISSION 0CK] or TRANSMISSION, REMOVING [8-SPEED AUTOMATIC TRANSMISSION 0BK AWD] .
-- Remove the spur gear unit. Refer to SPUR GEAR DRIVE, REMOVING AND INSTALLING .
-- Remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Place the :SMN372500 under the engine and leave it there for the following steps.
-- Remove the bolts -arrows- and the oil pipe.
NOTE:
Oil Escapes When Removing Oil Pipes.
-- Remove the bolt -arrow- and remove the intake tube.
-- Remove the bolts -arrows- and remove the oil pump.