LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1024 (Engine Lubrication System (Service Information - CEUC, CRDB, CTGE, CWUB, CWUC)) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Level Thermal Sensor -G266-, Removing And Installing >> Installing

Oil Level Thermal Sensor -G266-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Replace the seal -2-.

-- Fill With Engine Oil And Check The Oil Level. Refer to the appropriate service information.

scientia non olet · About LEMON Manuals