Cover In The Inner-V, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the housing for the charge air cooler. Refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and then remove the hose lines.

-- Loosen the hose clamps to remove the oil return hose -2-.

-- Remove the bolts in the following sequence -11 to 1-, and then remove the cover in the inner-V.

Fig 1: Cover Bolts Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -arrow- and free up the wire.