LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Ignition/Glow Plug System (CEUC, CRDB, CTGE, CWUB, CWUC)) >> 28 Ignition/Glow Plug System >> Ignition System >> Knock Sensor, Removing And Installing >> Knock Sensor 4 -G199-, REMOVING AND INSTALLING >> Removing

Knock Sensor 4 -G199-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the steering gear. Refer to STEERING GEAR .

-- Disconnect the connector -arrow-.

GWWA24-11071Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2-.

GWWA24-11072Courtesy of AUDI OF AMERICA, LLC

-- Remove the Knock Sensor 4 -G199- and disconnect the connector -1-.

scientia non olet · About LEMON Manuals