LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1022 (Ignition/Glow Plug System (CEUC, CRDB, CTGE, CWUB, CWUC)) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Installing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

-- Install the ATF cooler. Refer to appropriate service information. or .

-- Install the right coolant pipe on the transmission. Refer to RIGHT COOLANT PIPE ON TRANSMISSION, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals