Special Tools
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Valve Seal :3364
- Seal Installer - Valve Stem :3365
- Valve Cotter Tool Kit :VAS5161A with Valve Cotter Tool Kit - Guide Plate 19c :VAS5161/19C or as an alternative Valve Cotter Tool Kit - Guide Plate 19B :VAS5161/19B
- Engine And Transmission Holder :VAS6095
- Cylinder Head Tensioning Device :VAS6419
Special tools and workshop equipment required
- Engine Support Bridge :10-222A
- Engine Crane Adapter - Bracket :T10013
- Threaded pin of Engine Support Bracket :T10338
- Engine Support - Basic Set :T40091
- Engine Support - Supplement Kit :T40093A with :T40093/7 , and :T40093/8
- Commercially available XZN M12 socket, minimum 75 mm long
- Sealant. Refer to the parts information.
Special tools and workshop equipment required
- Engine Support Bridge :10-222A
- Engine Support - Bracket w/Spindle and Hook :10-222A/10
- Engine Crane Adapter - Bracket :T10013
- Threaded pin of Engine Support Bracket :T10338
- Engine Support - Basic Set :T40091
- Engine Support - Supplement Kit :T40093A with :T40093/7 , and :T40093/8
- Commercially available XZN M12 socket, minimum 75 mm long
- Sealant. Refer to the parts information.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm :VAG1332
- Torque Wrench 1332 Insert - Open Ring Wrench - 24mm :VAG1332/9
- Locking Pin :T40071 (quantity: 2)
- Wrench - 21mm :T40263
- Camshaft Lock :T40264
- Wrench - Camshaft :T40269
Special tools and workshop equipment required
- Impact Puller :T10133/3 from Injector/Combustion Chamber Seal Tool Set :T10133B
- Locating Pins :T40116
- Wrench - 21mm :T40263
- Camshaft Lock :T40264
- Wrench - Camshaft :T40269
- Crankshaft Turning Tool :T40272
Special tools and workshop equipment required
- Hand drill with plastic brush attachment
- Protective eyewear
- Sealant. Refer to the parts information.
- Spark Plug Removal Tool :3122B
- Puller - Valve Seal :3364
- Seal Installer - Valve Stem :3365
- Valve Cotter Tool Kit - Adapter :T40012
- Compression Tester Kit :VAG1763
- Valve Keeper Tool Kit :VAS5161A
with Valve Cotter Tool Kit - Guide Plate 19c :VAS5161/19C
or as an alternative Valve Cotter Tool Kit - Guide Plate 19B :VAS5161/19B
- Dial Gauge - 0-10mm :VAS6079
- Dial Gauge Holder :VW387