Overview - Right Camshaft Timing Chain
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 80 Nm + 90°
- Always replace
- With driver for vacuum pump
- Camshaft Adjuster
- For the intake camshaft
- Designation "IN"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bolt
- 80 Nm + 90°
- Always replace
- Camshaft Adjuster
- For the exhaust camshaft
- Designation "EX"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bolt
- 20 Nm + 45°
- Always replace
- Mounting Pin
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position.
- Drive Chain Sprocket
- For the right camshaft timing chain
- Installed position.
- Right Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Removing from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Thrust Washer
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position.
- Chain Tensioner
- For the right camshaft timing chain
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN TENSIONER, REMOVING AND INSTALLING .
- Glide
- Bolt
- 5 Nm + 90°
- Always replace
- The alignment bushings in the right camshaft timing chain drive sprocket mounting pins -3- must engage in the holes in the thrust washer -1- and cylinder block.
2 - Right Camshaft Timing Chain Drive Sprocket
4 - Bolt