LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1018 (Suspension System (Self-Leveling - Service Information)) >> Self-Leveling Suspension >> Dynamic Ride Control (DRC) >> Overview - Central Valve

Overview - Central Valve

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Central Valve
GWWA43-10234Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 20 Nm
  2. Bracket
  3. Central Valve
    • The DRC system consists of two separate hydraulic systems. The central valves are connected diagonally to the applicable shock absorber.
    • Removing and Installing. Refer to CENTRAL VALVE, REMOVING AND INSTALLING .
  4. DRC Line to Rear Shock Absorber
    • 14 Nm
    • Green marking at left
    • Blue marking at right
  5. DRC Line to Front Shock Absorber
    • 14 Nm
    • Yellow marking at left
    • White marking at right
  6. Bolt
    • 20 Nm
GWWA43-10243Courtesy of AUDI OF AMERICA, LLC
  1. Extract/fill valve with hose line, make sure it is free of tension when installed
  2. Bracket
  3. Clip
  4. Union nut, 14 Nm
  5. Additional element with motor, installed on vehicles with variable damping
  6. DRC shock absorber
  7. Union nut, 14 Nm
  8. Clip
GWWA43-10244Courtesy of AUDI OF AMERICA, LLC
  1. Additional element with motor, installed on vehicles with variable damping
  2. Extract/fill valve with hose line, make sure it is free of tension when installed
  3. Clip
  4. Union nut, 14 Nm
  5. Bracket
  6. Clip
  7. Union nut, 14 Nm
  8. DRC shock absorber
scientia non olet · About LEMON Manuals