Component Location Overview - Gaskets
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Flywheel
- Removing an installing. Refer to FLYWHEEL, REMOVING AND INSTALLING .
- Left Flange Shaft Seal
- Replacing. Refer to LEFT SEAL, REPLACING .
- Front Differential
- O-ring
- Replace after removing.
- Final Drive Cover
- Tightening specifications and sequence. Refer to
- Right Flange Shaft
- Removing and installing. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .
- Right Flange Shaft Seal
- Removing and installing. Refer to RIGHT SEAL, REPLACING .
- Selector Lever
- Removing and installing. Refer to SELECTOR MECHANISM [For engine(s) CYNB, CPNB] or .
- Selector Shaft Seal
- Replacing. Refer to SELECTOR MECHANISM [For engine(s) CYNB, CPNB] .
- Left Flange Shaft
- Removing and installing. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .
- Clutch Cover Seal
- Replacing. Refer to INPUT SHAFT SEAL, REPLACING .