Vehicle With All Wheel Drive Clutch: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Gearshift Shaft Seal, Removing and Installing, Transmission Installed
Special tools and workshop equipment required
- Assembly Device - Sleeve :T40367/1
- Assembly Device - Thrust Piece :T40367/2
- Puller - Crankshaft/Power Steering Seal 2 :T20143/2
- Sealing Grease Allocate according to the Parts information.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Seal - Output Shaft