Component Location Overview - Seals
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
- Flywheel
- Removing and installing. Refer to FLYWHEEL, REMOVING AND INSTALLING .
- Left Flange Shaft Seal
- Front Differential
- O-Ring
- Replace after removing
- Final Drive Cover
- Removing and installing. Refer to LEFT SEAL, REPLACING .
- Right Flange Shaft
- Removing and installing. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .
- Right Flange Shaft Seal
- Replacing. Refer to RIGHT SEAL, REPLACING .
- Gearshift Lever
- Gearshift Shaft Seal
- Replacing. Refer to SELECTOR SHAFT SEAL, REPLACING .
- Left Flange Shaft
- Removing and installing. Refer to LEFT FLANGE SHAFT, REMOVING AND INSTALLING .
- Input Shaft Seal
- Replacing. Refer to INPUT SHAFT 1, DISASSEMBLING AND ASSEMBLING .