LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Differential System (Service Information - 7-Speed Dual Clutch - 0CK - 2 Of 2)) >> Final Drive, Differential >> Differential >> Right Flange Shaft, Removing And Installing >> Removing

Right Flange Shaft, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right drive axle. Refer to DRIVE AXLE .

-- Place the :SMN372500  underneath.

GWWA39-10255Courtesy of AUDI OF AMERICA, LLC

-- Attach the :T10037  to the transmission housing -arrow- and remove the flange shaft.