Rear Lid Opener Control Module -J938-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move out the ball head of the trailer hitch. Refer to the Owner's Manual.
-- Remove the bolts -arrows- on the lower section of the bumper cover.
-- Disconnect the connectors -1 and 2-.
-- Remove the bolt -4-.
-- Remove the control module -3- from the brackets on the bumper cover -arrows-.
-- If the control module is replaced, release the tab -3- -arrow- and disengage the bracket -2- from the control module -1-.