LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1012 (Exterior System (Hood & Lids - Service Information)) >> 55 Hood, Lids >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Gas-Filled Strut With Metal Clip, Removing And Installing >> Removing

Gas-Filled Strut With Metal Clip, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Support the lid or secure it against falling.

-- Using a small screwdriver, lift the locking spring -1- slightly and remove the gas-filled strut -2- from the ball stud.

GWWA55-10891Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals