Overview - Hood, Latch
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Hood Latch
- Loosen the bumper cover at the top.
- Disconnect the cable from the latch.
- Disconnect the connector.
- Remove the bolts -1 and 2-.NOTE:
Move the latch in the oblong holes in the lock carrier to adjust the height of the hood.
- Lock Carrier
- Bolt
- 11 Nm
- Hood Latch Wire