Insulation, Removing And Installing: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Clip
Hood Trim
- Installation:
  -- Slide the trim over the tabs on the rear edge into the holes provided on the inner panel.
  
  -- Insert the tabs at the front edge and sides.
  
  -- The clips must engage audibly when pressing in.
  
  -- Press the clip in.
Hood
Clip