Gas-Filled Strut, Venting: Procedure
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Clamp the gas-filled strut in a vise in the area -x- = 50 mm.
WARNING:
- Clamp only within this area, otherwise there is a risk of an accident.
- Wear protective eyewear when sawing.
NOTE:
Cover the saw cut area with a cleaning cloth to absorb any oil spraying out.
-- Saw the gas-filled strut cylinder within the first third of the overall cylinder length, starting from the edge on the piston rod side.