LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1011 (General Maintenance (1 Of 2)) >> Maintenance >> Procedure Descriptions >> Wheel Bolts, Tightening To Tightening Specification >> Wheel Bolts

Wheel Bolts

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Warning information for the high voltage system:

For procedures where the ignition must be switched off, refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED OFF .

The adapter to loosen/tighten the anti-theft wheel bolts is located with the vehicle tool kit.

NOTE:

Be sure to tighten wheel bolts in diagonal sequence to the following specified torque:

Tightening specification Nm
Wheel Bolts 120

-- Place the adapter and extractor back in the vehicle tool kit.

scientia non olet · About LEMON Manuals