Clean and Lubricate the Wind Deflector Seal
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the glass sunroof panel back until the wind deflector is completely in position.
NOTE:
It is not necessary to remove the wind deflector.
-- Remove grease and dirt residue on the wind deflector seal -arrow- using cleaning solution D 009 401 04 and a lint-free cloth.
-- Apply a >>thin<< layer of Krytox paste G 052 141 A2 from underneath onto the rubber lip of the wind deflector -arrow- using a commercially available paint brush.
- After applying, make sure that there is >>no visible white grease film<< remaining.
-- Wipe away any extra Krytox paste from the rubber lip with a lint-free cloth.