Clean and Coat the Glass Cover Seal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the glass sunroof panel.

NOTE:

For opened glass sunroof panel, first coat the front and then install the rear.

-- Remove grease and dirt residue on the glass sunroof seal -arrow- using cleaning solution D 009 401 04 and a lint-free cloth.

Courtesy of AUDI OF AMERICA, LLC

-- Apply a >>thin<< layer of Krytox paste as far as possible on the glass sunroof panel -arrow- with a commercially available paint brush.

After applying, make sure that there is >>no visible white grease film<< remaining.

-- Wipe away any excess Krytox paste from the seal with a lint-free cloth.