LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1011 (General Maintenance (1 Of 2)) >> Maintenance >> Procedure Descriptions >> Spark Plugs, Replacing >> 8-Cylinder 4.0 TFSI Gasoline Engine >> Ignition Coils, Installing

Ignition Coils, Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosely place all ignition coils in spark plug shaft.

-- Align ignition coils to connectors and place all connectors evenly on ignition coils.

-- Press ignition coils evenly by hand onto spark plugs (do not use a hammer under any circumstances).

Installation is the reverse of removal.

NOTE:

Secure all hose connections with hose clamps that match current standard production. Refer to Parts information.

scientia non olet · About LEMON Manuals