4-Cylinder 2.0L TFSI And 2.0L TFSI Hybrid Gasoline Engines: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover (2.0L TFSI). Refer to 2.0 TFSI GASOLINE ENGINE .
-- Remove the engine cover (2.0L TFSI Hybrid). Refer to 2.0 TFSI GASOLINE ENGINE .
-- Open both screws on the connector strip.
-- Using the Puller :T40039 remove all the ignition coils approximately 30 mm out of the spark plug shaft.
-- Release the connector and pull all the connectors at the same time from the ignition coils.
-- Remove spark plugs using Spark Plug Wrench :3122B .