4-Cylinder 2.0L TFSI And 2.0L TFSI Hybrid Gasoline Engines: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Note: IGNITION COILS, LUBRICATING .
-- Install new spark plugs.
-- Loosely place all ignition coils in spark plug shaft.
-- Align the ignition coils with the connectors -arrows- and connect all connectors to the ignition coils at the same time.
-- Press the ignition coils evenly by hand onto the spark plugs (do not use a hammer).
Installation is the reverse of removal.