Removing the Ignition Coils from Cylinder Bank 1
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to 3.0 TFSI GASOLINE ENGINE .
-- Free up the fuel line -1- and the line -2- from the EVAP canister on the air filter housing and air duct pipe.
-- Remove the vacuum hose -3- from the connection on the air guide pipe.
-- Loosen the hose clamps -arrows- and remove the air guide pipe.
-- Remove the screws -arrows- and disconnect the connectors on the ignition coils.
-- Move the wiring harness slightly down.