Clean and Lubricate the Sunroof Motor Locking Pin
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Position the glass panel.
-- Remove the grease and remaining dirt from the sunroof motor locking pin with a lint-free cloth. (If necessary, remove sand and fine pollen from the sunroof motor).
-- Apply the lubricant G 060 751 A2 to the sunroof motor locking pin on the underside -arrow- with a commercially available paint brush.
-- Remove the excess lubricant from the sunroof motor with a lint-free cloth.
-- Repeat the process for the opening on the opposite side of the vehicle.
- Open and close the glass cover several times so that the lubricant can be worked in.