Clean and Lubricate the Sliding Cams
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the glass cover back until the wind deflector is completely in position.
-- Remove any remaining lubricant and contaminates from the sliding lobes with a lint-free cloth.
-- Apply lubricant G 060 751 A2 to the underside of the sliding lobes -1- with a commercially available brush.
-- Remove any excess lubricant from the sliding lobes with a lint-free cloth.
-- Repeat the process for the opening on the opposite side of the vehicle.