LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1011 (General Maintenance (1 Of 2)) >> Maintenance >> Procedure Descriptions >> Key, Check Functionality

Key, Check Functionality

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Separate keys so that the function of each key can be checked individually.

-- Mechanically lock and unlock vehicle with keys on driver door.

-- Insert each key into the ignition and start the engine.

-- If engine switches off by itself after about 3 seconds and "SAFE" appears in the odometer display, the key has not been programmed to the immobilizer.

-- Repair measures: Guided Fault Finding (Programming vehicle keys).

-- Note in the delivery check list the number of keys checked and given to the owner.