Hood Safety Catch, Lubricating
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Warning information for the high voltage system:
For procedures where the ignition must be switched off, refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED OFF .
-- Perform the following steps in the given sequence:
NOTE:
f
Vehicle must be at least at room temperature.
Operate the moveable components several times to allow the universal oil to seep in.
Remove any excess lubricant with a lint-free cloth.
f
-- Coat the hood safety catches with universal oil-Spray G 000 115 A2 at the marked positions -arrows-.