LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1011 (General Maintenance (1 Of 2)) >> Maintenance >> Procedure Descriptions >> Coolant System, Coolant Additive, Checking And Filling Coolant >> Coolant Level, Checking and Filling >> Mixture Ratio

Mixture Ratio

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Freeze protection to Coolant additive Water
-13° F (-25 °C) approximately 40 % approximately 60 %
-31° F (-35 °C) approximately 50 % approximately 50 %
-40 °F (-40 °C) approximately 60 % approximately 40 %
NOTE:

Coolant additive prevents freeze and corrosion damage, scaling, and raises the boiling point. For these reasons the cooling system must have coolant additive the whole year.

Especially in countries with tropical climates or when vehicle is driven under heavy load, the coolant improves the engine reliability by its increased boiling point.

The coolant concentration must not be reduced by adding water, even during the warmer season. The coolant additive ratio must be at least 40%.