With Manual Transmission

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cover cap from the clutch slave cylinder bleed screw.

Courtesy of AUDI OF AMERICA, LLC

-- Attach the container bleed hose -1- onto the clutch slave cylinder, open the bleed screw, and drain the appropriate brake fluid quantity (see table). Close bleeder screw and install cover cap.

-- Press the clutch pedal several times.

-- Move filler lever on Brake Charger/Bleeder Unit :VAS 5234 to position -B- (see operating instructions).

-- Remove the filler hose from the adapter.

-- Remove the adapter from the brake fluid reservoir.

-- Check brake fluid level and fill if necessary.

Courtesy of AUDI OF AMERICA, LLC

-- Install the brake fluid reservoir cover -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Check pedal pressure and brake pedal free play. Free play: max ¹ /₃ of pedal travel