Front Axle
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Brake caliper with two bleeder screws (depending on vehicle equipment).
-- Remove the cap -1- from the bleed screw on the left front brake caliper.
-- Attach the bleed hose container -1- to the bleeder screw on the inside of the wheel rim.
-- Open bleeder screw and let the corresponding amount of brake fluid (see table) flow out.
-- Close bleeder screw.
-- Reattach the brake caliper bleeder screw cap.
-- Repeat the steps for the front right.