LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Seat System) >> Front Seat >> Assembly >> Driver's Seat

Driver's Seat

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When installing the inner seat belt assembly, follow the procedures described in the seat belt section. < Ref. to INSTALLATION , Front Seat Belt. >
  • Install the backrest assembly and seat cushion assembly in the following procedure.
  1. Make sure that there is no foreign matter on side airbag module.
  2. Temporarily tighten the reclining hinge bolts.
  3. Place the backrest in the most upright position.
  4. Tighten the reclining hinge bolts (1) through (4) in order, in two or three steps by gradually increasing the torque until they reach the specified torque.
    Fig 1: Reclining Hinge Bolts Tightening Sequence
    G07680479Courtesy of SUBARU OF AMERICA, INC.
  5. Assemble each part in the reverse order of disassembly.
scientia non olet · About LEMON Manuals