Guidelines For Clean Working Conditions

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Always clean connection places and surrounding areas with engine or brake cleaner before loosening and dry cleaned places.
Clean the transmission and transmission components using Cleaning Solution :D 009 401 04 .
Use lint-free cloths when cleaning, for example, the " X70 / " cloth made by Kimberly-Clark Professional.
Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set :VAS6122 .
Place removed parts on a clean surface and cover them. Use foil and paper. Use a lint-free cloth!
Carefully cover or plug unpacked components if repairs cannot be performed immediately.
Only install clean components: Install replacement parts immediately after removing them from their packaging.
Protect the disconnected connectors from dirt and moisture and only connect when they are dry.