LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1007 (Suspension System (Precautions & General Information)) >> 00 General, Technical Data >> Repair Information >> Wheel Bearing In Control Position, Lifting Vehicles With Air Suspension >> Sedan/Avant Rear Axle

Sedan/Avant Rear Axle

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Chassis (1) Dimension -a-
Standard suspension (1BK) 382 ± 10 mm
Heavy duty suspension (1BS) 387 ± 10 mm
RS suspension (2MA) 384 ± 10 mm
Sport suspension (2MB) 382 ± 10 mm
allroad (1BY) 390 ± 10 mm
(1) The suspension that the vehicle is equipped with is indicated on the vehicle data plate. The suspension is indicated by a PR number. For the correct PR numbers and assigned suspensions. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATION .

-- Lift the wheel bearing housing using the :VAS6931  until the dimension -a- is reached.

GWWN40-0650Courtesy of AUDI OF AMERICA, LLC
WARNING:
  • Do not lift or lower the vehicle when the :VAS6931  is below the vehicle.
  • Do not leave the :VAS6931  under the vehicle any longer than necessary.
scientia non olet · About LEMON Manuals