Threshold "A" In Mm
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the readout value is greater than the limit value "a" (table value): Damping effect insufficient, see replace shock absorber.
If the readout value is less than the limit value "a" (table value): Damping effect sufficient → Shock absorber does not need to be replaced.
| Vehicle Type | Front Axle | Rear Axle | Comment | ||
|---|---|---|---|---|---|
| Standard suspension air suspension 1BK with 17 inch and 18 inch tires (1) | 42 | 52 | No load tank full | ||
| Standard suspension air suspension 1BK with 19 inch and 20 inch tires (1) | 40 | 40 | No load tank full | ||
| Sport suspension air suspension 2MB | In production | In production | No load tank full | ||
| Standard suspension 1BA | 46 | 46 | No load tank full | ||
| Sport suspension 1BE | 40 | 40 | No load tank full | ||
| Heavy duty suspension 1BB | In production | In production | No load tank full | ||
| Standard suspension 1BH | In production | In production | No load tank full | ||
| Heavy duty suspension 1BR | In production | In production | No load tank full | ||
| Heavy duty suspension air suspension 1BS | In production | In production | No load tank full | ||
| Sport suspension 1BV | 40 | 40 | No load tank full | ||
| allroad 1BY | In production | In production | No load tank full | ||
| RS suspension air suspension 2MA | In production | In production | No load tank full | ||
| Sport suspension air suspension 2MB | In production | In production | No load tank full | ||
| RS suspension 2MC | In production | In production | No load tank full | ||
|
|||||
The Tires must be "Partially Loaded" when Measuring the Tire Pressure.