Clean Working Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Thoroughly clean connecting points and their surrounding areas before loosening.
When installing steering gear, make sure centering sleeves are correctly seated between console and steering gear.
Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Only use lint-free cloths!
Only install clean components: Remove the replacement parts from their packaging just prior to installing them.
Use exclusively lubricants and sealants marked with part numbers.
Carefully cover or seal open components, if repairs are not carried out immediately.