Hid Headlamps Usage And Safety Precautions
There Is A Risk Of Injury From Electric Shock
When the headlamps are switched on, the HID headlamp components marked with the yellow high-voltage symbol are under high voltage. Electric shock may occur if components are contacted.
-- Never touch the components marked with the yellow high-voltage symbols when the lighting is switched on.
-- When performing procedures, switch off the ignition and all electrical equipment, and place the ignition key outside of the vehicle.
-- Do not flash the headlights (flash-to-pass).
Risk Of Injury From Burning, UV Radiation, Blinding And Explosions Of The HID Headlamp Bulbs.
-- Only operate the HID headlamp bulb in the headlamp housing.
-- Do not look in the light beam.
-- Avoid contact with burst bulb glass.
-- Remove and install the HID headlamp bulb with protective eyewear and gloves.