Guidelines For Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Even Very Small Particles Of Dirt Can Cause A Fault. For This Reason Follow The Rules Of Cleanliness When Working:
- Thoroughly clean the connection locations/maintenance openings and the area around them prior to loosening/opening.
- Seal off any open lines and connections immediately with plugs, for example, taken from the :VAS6122 .
- Place removed parts on a clean surface and cover them, do not use any lint cloths.
- Cover or seal any open components carefully if the repair is not going to be performed immediately.
- Only install clean parts: remove replacement parts from the packaging just before installing. Do not use any parts that have been removed from their packaging and left out (for example, in tool boxes).
- Do not use compressed air when the system is open.
- Protect any disconnected connectors from dirt and moisture and connect them only when they are completely dry.